QS4-CPU-2 can't retrieved data from the panel to laptop...

Post Reply
raven0055
Posts: 1
Joined: Wed Nov 03, 2010 4:47 pm

QS4-CPU-2 can't retrieved data from the panel to laptop...

Post by raven0055 »

hello..
I have a problem w/ the QS4-CPU-2 that i can't retrieve data from the panel using RJ11 connector or PS6 rs232 this CPU is new, and its my first time to programmed QS4-CPU-2. Because i program before are QS4-CPU-1, QS1-CPU-1 is there a big different procedure on how program this CPU???
Leo
Site Admin
Posts: 889
Joined: Thu Dec 11, 2008 7:52 am

Re: QS4-CPU-2 can't retrieved data from the panel to laptop.

Post by Leo »

If this is a new QS panel it may not have any database to retrieve.

QS4-CPU-1 or QS4-CPU-2, the 1 or 2 is the size of the front panel, can it hold 1 or 2 switch/led panels

no real different between the two panels
FireTech
Posts: 80
Joined: Wed Dec 24, 2008 9:44 am

Re: QS4-CPU-2 can't retrieved data from the panel to laptop.

Post by FireTech »

What version Code is in Panel? 2.5??

1-) Assuming problem is not Wrong 9 pin serial port connector. IE--You cant use your ESt3 Rj-11 9 pin connector to load quickstart.
2-) Did you try 9600 baud rate? (instead of 38300k baud)
3-) On right com port in QS software?
4-) Are you using v2.5 (not v 1.8)


Sometimes, If I cant talk to panel and I tried everything, I will load 2.5 code loader. (Even if v 2.5 is already installed.) Just to get comms rollling.
Post Reply