TheAlarmTech.com

plobek wrote: ↑Fri Apr 08, 2022 2:59 pm Notifier afp 1010 don't have level 2 programing code. Error code is 0883C3C can anyone help decipher this?

Try 11789

Hi

I Have a NFS-320
The code is: 93D1-6BBD-2096-9D84-60B6

help me please.

mene143 wrote: ↑Mon Jul 04, 2022 1:33 pm Hi

I Have a NFS-320
The code is: 93D1-6BBD-2096-9D84-60B6

help me please.

PM sent

I have an NFS-320SYS that we have lost the password for.

Error: 0B1D-84B0-4B51-1CA9-22B9

Hi
My NFS320 incorrect password code is : 4F65-08F5-08C5-0307-8B28

Please help
Thanks

YOU NEED TO CONTACT NOTIFIER

Notifier Panel Password Lost 1010,2020,3030,640,320
Post by Leo » Sat Oct 10, 2015 7:51 pm
800-289-3473
"Lost Password"
default programming Password all zeros: 00000000
Notifier stores the password for the panel in the panel not in the software.
If the password is Lost or unknown it needs to be recovered.
this can be done by contacting Notifier with the error code that displays when a incorrect password is entered.
The customer "not the alarm company" needs to send a letter to Notifier with error code, Notifier will call the customer with the code
Panel's password is stored in panel: AFP-200,320,640,1010,2020,3030,NCA
the older panels "AFP-200,1010,2020" can be found by a few forum users if you post the panel type and error code someone will help.
the newer panels "320,640,3030,NCA" ONLY Notifier can get the panel code via the error code.
again "ONLY NOTIFER CAN GET YOU THE PANEL CODES"

Verifire Tools is the software used to program the ONYX Series panels "NFS-320, NFS-640,NFS-3030"
Verifire Tools can not help you with finding the panel password
Via Verifire Tools without the password the panel can be uploaded, but not downloaded
if the panel is replaced it can now be downloaded, but you are replacing the panel or panels

hendri82 wrote: ↑Thu Oct 20, 2022 3:39 am Hi
My NFS320 incorrect password code is : 4F65-08F5-08C5-0307-8B28

Please help
Thanks

PM sent

i Have a XLS140 with XLS-NCA2 display
The code is: 3532-66CF-A961-6AF7-2CF7

Please need code

I have Johnson Control & XLS Honeywell panel. Whenever I taken error code at 12:00a it not shown 86AE last Four Digit.
How can I get the error code last 4 digit of 86AE in XLS140/3000 & IFC-320/640/3030 Like Notifier.

Pls. Help

the code changes every minute. does not care about the day
I put the time of 12:00 midnight to get the same error code each time
I want to a place with 5 locations all with the same code
but I would not have known this if i did not change the time to 12:00