TheAlarmTech.com

I had to buy a 32bit computer to run 4.0
and a 64bit for 5.xx
in some way this is your problem
did you try exporting and importing

SuperDuct 4-Wire Controller With RTS151 Wiring an EST four-wire superduct controller with a System Sensor RTS151 2 conductor for the duct trip 4 conductor for System Sensor RTS151 test switch green and red LED will work rts151 1 red (red LED) 2 black (common ) 3 yellow (Test/Reset) 4 5 6 green (gre...

technicalsupp-999@hotmail.com
send me an EST3 code
or a VeriFireTools code

I will check it and if it is good I will post that it worked
if you do not send me a code I am deleting all your post.

because it you don't that means you are trying to steal from us
not ok

it's CPU
but first try
load a blank database, no rules, no cards

if you buy one and it is not bad, you need a spare anyway

that is not a simple find
who would thought that.
nice find

I had problems using SDU-4.xx with my computer because it is 64bit
I got an older 32bit computer for SDU with versions lower then 4.xx
I bet if you did get tech support, first thing they would tell you is to upgrade the panel's SDU version

did you try changing the ct2 address, if not what address are you using
if you have changed the address then your computer looks to be the only common thing

sometimes it is going to be what is it going to be, no one knows why
just got to do a work around

..System Sensor conventional D4120......4Wire D4120W.....OUTSIDE D4S........Smoke,smoke side only D4P120.....contoller,Power Board Only D2....2wire duct, no one uses ..System Sensor addressable SK-Duct...Silent Knight D355PL....FireLite DNR.......housing only DNRW......housing only,OUTSIDE Hochiki ...

Overview UDACT-2 is ONLY programmed with VeriFire Tools. within the 2020 you need to find which points are associated with which ACS Addresses use a hyper terminal type program, connect it to the 2020 printer port and run report turn the printed report into a file and clean it up so it looks like t...

fixed